Flumatic dispensing needles & nozzles

Precision at the tip: Flumatic dispensing needles for every viscosity

Whether thin adhesive or highly filled solder paste — the right nozzle geometry determines repeatability and scrap rate. smt-Sander carries the Flumatic range for electronics manufacturing, medical technology and industrial OEM assembly.

// FLUMATIC

Where precision meets material

The best dispensing robot is only as good as the tool at its tip. While many suppliers treat the nozzle as a simple consumable, it is the critical interface of your production process. Flumatic specializes in supplying the right nozzle geometry for every viscosity and every chemical requirement.

High-precision needles: manufactured to tight tolerances to make use of capillary effects and prevent post-dispense stringing.
Material-specific solutions: chemically resistant stainless steel cannulas for aggressive media, or specially coated nozzles for highly filled pastes.
Optimized flow geometry: minimized shear forces protect sensitive media and ensure a constant flow rate.

The goal is to eliminate scrap: Flumatic nozzles deliver repeatability that stays stable even for micro-dispensing down to fractions of a millimeter — essential wherever electronics manufacturing or medical technology leaves no room for inconsistency.

// PRODUCT RANGE

Nozzle types at a glance

A selection from the available Flumatic range — details, batch sizes and prices on request.

TN — TAPERED NOZZLES

Tapered dispensing tips

Polyethylene tips for high-viscosity media such as adhesives, silicone or solder paste. Color-coded by gauge size.

TE — DISPENSING TIPS

Stainless steel dispensing tips

Precision cannulas with polished stainless steel tubing for low- to medium-viscosity liquids and flux.

45 Grad gebogene Dosierdüsen aus Edelstahl

TE 45° — GEBOGEN

Angled dispensing tips

45° angle for hard-to-reach application points and cases where a straight needle is not sufficient.

Metall-Adapter und Kanülen für Dosiersysteme

ALL METAL TIPS

All-metal tips

All-metal design for chemically demanding or abrasive media, with extended service life.

Bürsten-Dosierdüsen mit Borsten an der Nadelspitze

BRUSH TIPS

Brush tips

Fine bristles at the needle tip for evenly spreading flux, solder paste or adhesive over a larger area.

Kleine Auswahl farbcodierter Dosierspitzen

TN — SORTIMENT

Color-coded range

Fast size recognition at the workstation through consistent color-coding by gauge.

TNTapered Nozzle — tapered tip

TEDispensing Tips — stainless steel cannula

TE7Stainless steel nozzles, precision grade

TFTeflon Nozzle — PTFE-coated

TEFPTFE Dispensing Tips

PPFlexible Dispensing Tips

MetalAll Metal Tips

BrushBrush Tips

// NAMING SYSTEM

How to read the type designation

All nozzles are color-coded — for example, red corresponds to size 25G.

TE7 25050 rot

TE7Dispensing Tip (product type)

2525G gauge size

0501/2" (50 mm) length

rotColor code matching 25G

// COLOR CODE GUIDE

Gauge sizes & color coding

Reference values for common sizes — inner diameter (ID) in mm, values may vary by batch ±0.03 mm.

Gauge	Part no.	Color	ID (mm)	Qty/bag
14G	TN14	Olive	1,50 ± 0,03	100
16G	TN16	Gray	1,20 ± 0,03	100
18G	TN18	Green	0,84 ± 0,03	100
20G	TN20	Pink	0,63 ± 0,03	100
22G	TN22	Blue	0,41 ± 0,03	100
25G	TN25	Red	0,28 ± 0,03	100

Further sizes (15G, 21G, 27G, 30G, etc.) as well as TE/TF/metal variants are available on request.

Precision at the tip: Flumatic dispensing needles for every viscosity

Where precision meets material